About Us
Dallas HVAC Parts is an HVAC parts shop located in Dallas, Texas. We are conveniently located at 11415 Plano Rd., Dallas, Texas 75243.
We provide heating and cooling parts and accessories for local homeowners and contractors. We also ship parts nationwide to those not in the Greater Dallas area.
If you don’t see what you need or you have any questions, please don’t hesitate to contact us at (214) 341-0063 or 1 (888) 686-5779. Our skilled craftsmen are available to help you.
Here what one of our satisfied customers has to say:
“I wanted to send a note of thanks to you and your staff. From the first contact everyone was friendly and helpful. I was cutting it close to making it to your store before closing. The gentleman I spoke to on the phone told me you were often there later than 5:00 pm. With traffic I made it just before 5. The sales person quickly located the motor that I needed and called in Chad to help with the wiring changes that were needed. They also made sure that I had the capacitor that I needed. I went home and installed the motor and it did not work. There were a couple of additional wires that I had questions about so the next day I called and Chad again helped me out. I cannot say enough about his patience and expertise. It is so nice to experience this high level of competence and service after the sale! I will recommend you to everyone I know.
Thank you again!”
– Roger Adams
“Your team recentlywent above the call of duty to find a variable speed motor for our air handler that had been discontinued. Glen even did some repair to the blower housing and installed the new motor. Another young man behind the counter went over the installation process with me and I was able to install the unit just as he had said. So often we only take time to complain but I Thank You and your team of experts for all of their and I will be the first to recommend Dallas HVAC Parts to my family and friends.
Thanks,
– Frank and Deborah C.
Featured Products
-
Unit Bearing Fan M...
Description: 16W, shaded pole, 1500 RPM, CCWOSE rotation, 3-25/32″ diameter, 230V A: 3-3/8″; Agency Certification: UR/CSA; Diameter: 3-25/32″; Enclosure: TE; F/L Amps: 0.40; Hz: 60; Mfg. #: ESP-L16EMR2; Mounting: Rigid Base; Phase: Single; Rot.: CCWOSE; RPM: 1500; Service Factor: 1.00; Shaft Diam.: 1/4″; Shaft Length: 1/2″; Speeds: 1; Type: Shaded Pole; Volts: 230; Watts: 16;
-
Mojave Series Cond...
Description: 48 frame, 825 RPM PSC motor, reversible rotation, all-angle mounting TEAO enclosure, class F insulation — thermal endurance to over 300°F Ball bearings 48″ leads Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 70; Bearing Type: Ball; Capacitor to Match: G21-930; Diameter: 5-5/8″; Efficiency: 60.4%; Enclosure: TEAO; F/L Amps: 2.1; HP: 1/4-1/8; Hz: 60; Insulation Class: F; Mfg. #: 1874H; Mounting: Stud; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 825; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 6″; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: PSC; Volts: 208-230; Wt. Lbs.: 13.0;
-
Electronically Com...
Description: ECM motor lowers operational costs through 50% increase in efficiency over shaded pole and PSC motors 1625 RPM; CCW rotation Diameter: 5/16″; Evaporator Type: Low Profile; HP: 1/15; Mfg. #: 22617701; Rot.: CCW; RPM: 1625; Volts: 208/230;
-
Electronically Com...
Description: Quick and easy solution for reducing costs and environmental impact without having to replace entire system Replacement motors lower operational costs through 50% increase in efficiency — or more — over shaded pole and PSC motors Easy-to-install as drop-in replacement; also available as an option on new Bohn, Larkin, Climate Control, and Chandler equipment Diameter: 5/16″; Evaporator Type: Low Profile; HP: 1/15; Mfg. #: 22617801; Rot.: CCW; RPM: 1625; Volts: 120
-
Unit Bearing Fan M...
Description: 51 frame, 9W, 1550 RPM Sleeve bearing, CWOSE rotation All-angle mounting, shaded pole, 1-speed Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Efficiency: 28.0%; Enclosure: TE; F/L Amps: 0.80; Hz: 60; Insulation Class: B; Mfg. #: D562; Mounting: All Angle; NEMA Frame: 51; Phase: Single; Rot.: CWOSE; RPM: 1550; Service Factor: 1.00; Speeds: 1; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115; Watts: 9;
-
Unit Bearing Motor...
Description: Single-speed, 6W, 1550 RPM, shaded pole CWOSE rotation, 50/60Hz All-angle operation, continuous air over A: 4″; Agency Certification: UR; Diameter: 3-1/2″; Efficiency: 35.0%; Enclosure: TEAO; F/L Amps: 0.40; Hz: 60; Insulation Class: B; Mfg. #: 65311; Mounting: Single Foot Pad; NEMA Frame: Non-Std.; Phase: Single; Rot.: CWOSE; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 1/4″-20 Thd; Shaft Length: 1/2″; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Impedance; Type: Shaded Pole; Volts: 115; Watts: 6; Wt. Lbs.: 3.0;
-
Direct Drive Blowe...
Description: 3-speed, PSC, sleeve bearing. 1075 RPM, 3 speed, resilent mounting Rotation: Plug reversible, capacitor not included Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-909; Diameter: 5-5/8″; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 4.00; HP: 3/4-1/3; Hz: 60; Insulation Class: B; Mfg. #: D970; Mounting: Resilient; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 5-1/2″; Speeds: 3; Thermal Protection: Auto; Type: PSC; Volts: 277; Wt. Lbs.: 17.8; Applications: Used for fan coils, condenser fans and other air-moving applications |Designed for a broad range of …
-
Direct Drive Blowe...
Description: 48 frame, 3-speed 1075 RPM, sleeve bearing Reversible rotation, open enclosure A: 4-1/2″; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-930; Diameter: 5-5/8″; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 5.90; HP: 1/3-1/5; Hz: 60; Insulation Class: B; Mfg. #: D727; Mounting: Resilient/Thru Bolts; NEMA Frame: 48; Phase: Single; R: 4-13/16″; Rot.: Rev.; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 6″; Speeds: 3; Thermal Protection: Yes; Type: PSC; Volts: 115; Wt. Lbs.: 14.0; Applications: Ideal replacements for blowers in direct drive furnaces, air conditioners and exhaust fans Features: PSC |Open …
-
Condenser Fan Moto...
Description: 48 frame, 825 RPM Reversible rotation, 1-speed, SAB bearing All-angle mounting A: 4-1/16″; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: SAB; Capacitor to Match: G21-930; Diameter: 5-5/8″; Efficiency: 60.0%; Enclosure: TEAO; F/L Amps: 1; HP: 1/6; Hz: 60; Insulation Class: B; Mfg. #: 1873; Mounting: Stud; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 825; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 6″; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: PSC; Volts: 208-230; Wt. Lbs.: 12.0; Applications: Replaces motors in units by Carrier/Bryant and others Features: 60°C ambient, thermally protected|Flat end …
-
Replacement for Ma...
Description: Single-speed, PSC motor for Magic Chef 2-ton condenser fan units Open ventilated on shaft end as is the original motor Sleeve bearings Replaces Magic Chef #35035B001, F42B59A01, CJK15, CTK18, CJK24, CJK30 and CJK36; Westinghouse #322P859; and Magnetek #DE3L038 A: 4-15/16″; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-930; Diameter: 5″; Efficiency: 65.0%; Enclosure: OAO; F/L Amps: 1.50; HP: 1/5; Hz: 60; Insulation Class: B; Mfg. #: OMC6517; Mounting: Thru-bolt; NEMA Frame: 42; Phase: Single; Rot.: CWOSE; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 3-3/8″; Speeds: 1; Std. Mount. Pos.: …