Description:

Three popular Millivolt parts all in one kit for repair or retrofit applications, includes a low profile millivolt actuated gas valve, a pilot generator kit and easy-to-use mercury free mechanical wall thermostat  Handy gas valve cross reference pocket guide 150-2320  Reduces truck-stock inventories by providing the three most common parts needed for repair/retrofit applications all in one convenient kit

BtuH Capacity: 112000; Bushings: (2) 1/2″ x 3/8″; Conn. Size: 1/4″ Tubing Pilot; Gas Type: Natural Gas; Inlet Conn.: 1/2″; Mfg. #: 710-296; Outlet Conn.: 1/2″; Reset Type: Auto;

The post Millivolt Kit L46-455 (Mfg# 710-296) appeared first on Dallas HVAC Parts.

Description:

1/2″ X 3/4″ Combo For use on LP or natural gas applications  Snap acting  Coil voltage: 24VAC; 0.45 Amps

BtuH Capacity: 150,000; Inlet Conn.: 1/2″; Mfg. #: 720-079; Outlet Conn.: 3/4″;

The post Universal Ignition Gas Valve L37-849 (Mfg# 720-079) appeared first on Dallas HVAC Parts.

The 110 Series Water Heater Thermostat Uni-Kit® and Commercial Water Heater Thermostat Uni-Kit® were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160°F temperature high stop. All commercial models have a 180°F temperature high stop. All models have a 5- 1/2″ sensing element and vary by inlet and outlet size, shank length, regulator type and setting. See ordering chart for exact specifications.

The post Robertshaw 110-32F/110-326 Natural Gas Water Heater Valve Uni-Kit w/ 1-3/8″ Shank (88,000 BTU) appeared first on Dallas HVAC Parts.

Description for Robertshaw 712-017

The Uni-Line 712 series pilot ignition system features flame rectification with solid-state logic and flame sensing to provide automatic sequencing that will ensure proper operation of an intermittent pilot ignition device. The 712 series pilot ignition system features quick and easy installation with complete in-depth instructions and trouble shooting information.

The 712 pilot ignition systems are available with one of four different gas valve types to fit a wide range of furnace applications. Depending on the model of gas valve used, 712 systems are available to handle applications up to 720,000 Btu (natural gas). See ordering chart for the exact specifications of each 712 series pilot ignition system.

The post Robertshaw 712-017 1/2″ X 3/4″ Combo Gas Valve w/ 780-715 Non-Lockout Ignition appeared first on Dallas HVAC Parts.

Description for Robertshaw 720-079

The 720 Series Dual Valve Gas Controls are designed for a wide variety of heating applications and can be used to replace most constant pilot valves, including dual valve (six function) models. The 720 Series constant pilot gas valve is a six function valve incorporating a manual valve, safety shutoff magnet, dual automatic valves (hence the term “dual valves”), main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kits® are factory-set at 3.5″ W.C. for natural gas, but can be converted to L.P. by installing the regulator conversion kit included. The 720 Series feature an integral manual selector used to select from the 4 gas flow positions ? off, on, pilot and “set”. The “set” position provides pilot only gas flow during magnet energizing and lock up. Built-in stops serve to prevent accidental setting to the off position. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16″ swing radius, the 720 series lends itself well to replacing many OEM valves. Controls are multiposition and can be mounted in any position (except upside down). To prevent unsafe attempts at repair, special screws are used and replacement parts are NOT available.

Features

• Electrical Ratings: 24 VAC, .5 amps, 50/60 Hz
• Pressure regulator: Natural Gas factory set at 3.5″ W.C.L.P. Gas factory set at 11.0″ W.C.
• Pilot Outlet: 1/4″ tubing
• Ambient Temperature: ?40° to 175°F
• Maximum Inlet Pressure: 14″ W.C. (1/2 PSI)

The post Robertshaw 720-079 1/2″ X 3/4″ Combo Gas Valve w/ LP Kit appeared first on Dallas HVAC Parts.

Description for White Rodgers 36J22-214

Features

• Combination Gas Valve
• Single Stage
• Fast Opening
• Inlet / Outlet pressure taps
• Plastic hose barb (for connection to 1/4″hose/flexible tubing)
• LP gas conversion kit
• Inlet/Outlet reducer bushings (1/2 NPT x 3/8 NPT)
• Regulator calibrated to 3.5 ± 0.3″

The post White Rodgers 36J22-214 Combo Gas Valve, Single Stage, Fast Opening appeared first on Dallas HVAC Parts.

Description for White Rodgers 36J54-214

Features

• Combination Gas Valve
• 2 Stage
• Fast Opening
• Inlet and outlet pressure taps
• Plastic hose barb (For connection to 1/4″ hose/flexible tubing)
• LP gas conversion kit
• Inlet/Outlet reducer bushings (1/2 NPT to 3/8 NPT)
• Hi-Fire regulator calibrated to 3.5

The post White Rodgers 36J54-214 Combo Gas Valve, 2 Stage, Fast Opening, Gas Conversion Kit appeared first on Dallas HVAC Parts.

Description for White Rodgers 36H64-463

The 36H Combination Gas Control Valve is a Versatile Multifunction Control Designed to Meet the Requirements for Use with Intermittent Ignition Systems (Direct Ignition, Proven Pilot). The 36H Valve is Our Highest Capacity Combination Gas Valve

Features

• 36H Two-Stage Gas Valve
• 3/4″ x 3/4″
• Reducer Bushings (Two 3/4″ to 1/2″)
• 24V
• 1.4″ Male Spade Quick Connect Terminals
• Nat. Gas (Includes LP Conversion Kit)
• For use on non-piloted or intermittent pilot applications (not standing pilot

The post White Rodgers 36H64-463 Redundant Valve 24V appeared first on Dallas HVAC Parts.

Description for White Rodgers 36H32-423

The 36H Combination Gas Control Valve is a Versatile Multifunction Control Designed to Meet the Requirements for Use with Intermittent Ignition Systems (Direct Ignition, Proven Pilot). The 36H Valve is Our Highest Capacity Combination Gas Valve

Features

• 3/4″ X 3/4″ Universal Gas Valve
• Reducer Bushings (Two 3/4″ To 1/2″)
• 24V
• 1/4″ Male Spade Quick Connect Terminals
• Nat. Gas (Includes LP Conversion Kit)
• For use on non-piloted or intermittent pilot applications (not standing pilot). Replaces 36C68-423

The post White Rodgers 36H32-423 Redundant Valve 24V appeared first on Dallas HVAC Parts.

Description for White Rodgers 36H32-304

The 36H Combination Gas Control Valve is a Versatile Multifunction Control Designed to Meet the Requirements for Use with Intermittent Ignition Systems (Direct Ignition, Proven Pilot). The 36H Valve is Our Highest Capacity Combination Gas Valve

Features

• 1/2″ X 3/4″
• 24 VAC
• Proven Pilot Valve
• Fast Open
• Electric On/Off Switch
• 1/4″ O.D Pilot Fitting included
• LP Conversion Kit
• 1/2″ X 3/4″ and 1/2″ X 3/8 Bushings
• flow – straight thru
• replaces 36E36-304

The post White Rodgers 36H32-304 1/2″ X 3/4″ Gas Valve, 24 VAC, Proven Pilot Valve, Fast Open, Electric On/Off Switch appeared first on Dallas HVAC Parts.