Description:

Female disconnect, 16-14 wire gauge, package qty: 100, nylon insulation

Description: Female Disconnect; Insulation: Nylon; Pkg. Qty.: 100; Size: 0.250; Wire Gauge: 16-14;

The post Standard Temperature Terminal G22-633 (Qty 100) appeared first on Dallas HVAC Parts.

Description:

For AC and refrigeration drains  Comes in E-Z dispenser box  3/8″ I.D. x 100′

I.D.: 3/8″; Length: 100′; O.D.: 1/2″;

The post Clear Vinyl Tubing R87-709 appeared first on Dallas HVAC Parts.

Description:

One-step fastening  Saber-sharp piercing point with a “fine-cut” machine thread, which pierces the metal upon contact  Once pierced, the thread propels the screw through metal rapidly and almost without effort  1/4″ hex head

Pkg. Qty.: 500; Screw Size: 8 x 1/2″;

The post Super Saber® Sheet Metal Screws, 500 Count, G32-814 (8 x 1/2″) G32-814 appeared first on Dallas HVAC Parts.

Description:

One-step fastening  Saber-sharp piercing point with a “fine-cut” machine thread, which pierces the metal upon contact  Once pierced, the thread propels the screw through metal rapidly and almost without effort  1/4″ hex head

Pkg. Qty.: 1,000; Screw Size: 8 x 1/2″;

The post Super Saber® Sheet Metal Screws, 1,000 Count, G31-389 (8 x 1/2″) appeared first on Dallas HVAC Parts.

Description:

Contains the essential trim-out components of a quality boiler installation in a single box includes: FV-4M1 float vent valve 1/8″ SCV service check valve 1/2″ SCV service check valve 1″ or 1-1/4″ AS air scoop ET-30 expansion tank 1/2″ 911S combination backflow and fill valve

Conn. Size: 1-1/4″ NPT; Mfg. #: 235071; Model #: HPX-D;

Could not load product information

The post Boiler Trim-Out Package R87-548 (Mfg. # 235071) appeared first on Dallas HVAC Parts.

This kit includes various dual element time delay and blade fuses, puller, holders and reducers

Reuseable sturdy storage case

Sturdy polypropylene storage case with adjustable compartments kit contains: Ten each: G31-525 (HAC-R-30) Five each: G32-189 (ATC-3), G32-043 (ATC-5) and G31-528 (HAC-R-60) Two each: G31-522 (HAC-R-15), G31-523 (HAC-R-20), G31-524 (HAC-R-25), G31-540 (HAC-R-35), G31-526 (HAC-R-40), G31-527 (HAC-R-50), G31-518 (SC-15) and G31-294 (HMJ fuse holder) One each: G31-167 (SL-15 pack of 4), G31-494 (#263 pair of fuse reducers) and H24-622 (FP-2 fuse puller)

Mfg. #: ERK-28J

The post HVAC Fuse Kit G80-071 (Mfg. #ERK-28J) appeared first on Dallas HVAC Parts.

Description:

Liquid sealants for use on ductboard, flex duct, duct fabric and flexible tubing runouts All are for indoor/outdoor use and are water based G80-197 and G80-198 have no-sag formula, UV inhibitors for extended outdoor exposure, built-in fiber reinforcement G80-202, G80-584 and G80-583 provide extended coverage and ease of application, and stay flexible to accommodate minor vibration and movement G80-199, G80-200, G80-585 and G80-656 have no-sag formula; UV inhibitors for extended outdoor exposure, polyester reinforcement All are UL181, USDA, FDA and EPA approved

Application: Indoor/Outdoor Water Based Duct Sealant; Approval/Listed: UL181B; Description: Duct-Seal 321 — Gray; Lot Qty.: 4; Mfg. #: DS-321-4; Size: One Gallon;

The post Liquid Mastic Duct Sealant – Gray – 1 Gallon G80-197 (DS-321-4) appeared first on Dallas HVAC Parts.

Description:

Liquid sealants for use on ductboard, flex duct, duct fabric and flexible tubing runouts All are for indoor/outdoor use and are water based G80-197 and G80-198 have no-sag formula, UV inhibitors for extended outdoor exposure, built-in fiber reinforcement G80-202, G80-584 and G80-583 provide extended coverage and ease of application, and stay flexible to accommodate minor vibration and movement G80-199, G80-200, G80-585 and G80-656 have no-sag formula; UV inhibitors for extended outdoor exposure, polyester reinforcement All are UL181, USDA, FDA and EPA approved

Application: Indoor/Outdoor Water Based Duct Sealant; Approval/Listed: UL181B; Description: Duct-Seal 321 — Gray; Lot Qty.: 25; Mfg. #: DS-321-25; Size: 11 Oz.;

The post Liquid Mastic Duct Sealant – Gray – 11 Oz. G80-198 (DS-321-25) appeared first on Dallas HVAC Parts.

Description:

G80-192 and G80-193 are red printed and UL classified for flame spread G80-325 and G80-326 are UL 181B-FX listed for use on flexible duct systems G80-194 and G80-195 are for higher pressure applications up to 10″ w.g.

Application: Indoor/Outdoor; Carton Qty.: 16; Description: Silver Foil Grip — Printed; Mfg. #: 1403-181BFX-3; Size: 3″ x 100′;

The post Rolled Mastic Duct Sealant 3″ x 100′ 1403-181BFX-3 appeared first on Dallas HVAC Parts.

Description:

G80-192 and G80-193 are red printed and UL classified for flame spread G80-325 and G80-326 are UL 181B-FX listed for use on flexible duct systems G80-194 and G80-195 are for higher pressure applications up to 10″ w.g.

Application: Indoor/Outdoor; Carton Qty.: 24; Description: Silver Foil Grip — Printed; Mfg. #: 1403-181BFX-2; Size: 2″ x 100′;

The post Rolled Mastic Duct Sealant 2″ x 100′ 1403-181BFX-2 appeared first on Dallas HVAC Parts.