KL-20-1ULT Low Profile Slimline Pump
Description:
Designed to fit most gas condensing and counterflow furnaces, air conditioning and refrigeration units with low condensate drains An efficient, low cost, lowline condensate remover for use where size and installation space is limited Ideal for high efficiency furnaces Low tank, lowest inlet only 1-3/4″ high Built-in check valve 6′ SJ cord and three-prong molded plug standard Listed with Underwriters Laboratories Inc. 727C, City of Los Angeles Sec. 93.0402 Construction: ABS plastic for high impact and corrosion resistance Snap action switch 3,000 RPM motor with stainless steel shaft and thermal overload protection Inlet 1-3/8″ I.D.; outlet 1/4″ NPT with fluted fitting for 3/8″ I.D. tubing ULT models include 20′ of high quality 3/8″ I.D. vinyl discharge tubing Models with “X” in mfg. # include auxillary safety switch
Amps: 1.7; GPH @ 12′: 38; GPH @ 18′: Shutoff; Mfg. #: KL-20-1ULT; Safety Switch: No; Volts: 115;
KL-20-1ULT Low Profile Slimline Pump:
Description: Designed to fit most gas condensing and counterflow furnaces, air conditioning and refrigeration units with low condensate drains An efficient, low cost, lowline condensate remover for use where size and installation space is limited Ideal for high efficiency furnaces Low tank, lowest inlet only 1-3/4″ high Built-in check valve 6′ SJ cord and three-prong molded plug standard Listed with Underwriters Laboratories Inc. 727C, City of Los Angeles Sec. 93.0402 Construction: ABS plastic for high impact and corrosion resistance Snap action switch 3,000 RPM motor with stainless steel shaft and thermal overload protection Inlet 1-3/8″ I.D.; outlet 1/4″ NPT with …
- Item Price: $69.99
- Listed On: March 22, 2012
Share This Item:
Featured Products
-
Unit Bearing Fan M...
Description: 16W, shaded pole, 1500 RPM, CCWOSE rotation, 3-25/32″ diameter, 230V A: 3-3/8″; Agency Certification: UR/CSA; Diameter: 3-25/32″; Enclosure: TE; F/L Amps: 0.40; Hz: 60; Mfg. #: ESP-L16EMR2; Mounting: Rigid Base; Phase: Single; Rot.: CCWOSE; RPM: 1500; Service Factor: 1.00; Shaft Diam.: 1/4″; Shaft Length: 1/2″; Speeds: 1; Type: Shaded Pole; Volts: 230; Watts: 16;
-
Mojave Series Cond...
Description: 48 frame, 825 RPM PSC motor, reversible rotation, all-angle mounting TEAO enclosure, class F insulation — thermal endurance to over 300°F Ball bearings 48″ leads Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 70; Bearing Type: Ball; Capacitor to Match: G21-930; Diameter: 5-5/8″; Efficiency: 60.4%; Enclosure: TEAO; F/L Amps: 2.1; HP: 1/4-1/8; Hz: 60; Insulation Class: F; Mfg. #: 1874H; Mounting: Stud; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 825; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 6″; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: PSC; Volts: 208-230; Wt. Lbs.: 13.0;
-
Electronically Com...
Description: ECM motor lowers operational costs through 50% increase in efficiency over shaded pole and PSC motors 1625 RPM; CCW rotation Diameter: 5/16″; Evaporator Type: Low Profile; HP: 1/15; Mfg. #: 22617701; Rot.: CCW; RPM: 1625; Volts: 208/230;
-
Electronically Com...
Description: Quick and easy solution for reducing costs and environmental impact without having to replace entire system Replacement motors lower operational costs through 50% increase in efficiency — or more — over shaded pole and PSC motors Easy-to-install as drop-in replacement; also available as an option on new Bohn, Larkin, Climate Control, and Chandler equipment Diameter: 5/16″; Evaporator Type: Low Profile; HP: 1/15; Mfg. #: 22617801; Rot.: CCW; RPM: 1625; Volts: 120
-
Unit Bearing Fan M...
Description: 51 frame, 9W, 1550 RPM Sleeve bearing, CWOSE rotation All-angle mounting, shaded pole, 1-speed Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Efficiency: 28.0%; Enclosure: TE; F/L Amps: 0.80; Hz: 60; Insulation Class: B; Mfg. #: D562; Mounting: All Angle; NEMA Frame: 51; Phase: Single; Rot.: CWOSE; RPM: 1550; Service Factor: 1.00; Speeds: 1; Thermal Protection: Auto; Type: Shaded Pole; Volts: 115; Watts: 9;
-
Unit Bearing Motor...
Description: Single-speed, 6W, 1550 RPM, shaded pole CWOSE rotation, 50/60Hz All-angle operation, continuous air over A: 4″; Agency Certification: UR; Diameter: 3-1/2″; Efficiency: 35.0%; Enclosure: TEAO; F/L Amps: 0.40; Hz: 60; Insulation Class: B; Mfg. #: 65311; Mounting: Single Foot Pad; NEMA Frame: Non-Std.; Phase: Single; Rot.: CWOSE; RPM: 1550; Service Factor: 1.00; Shaft Diam.: 1/4″-20 Thd; Shaft Length: 1/2″; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Impedance; Type: Shaded Pole; Volts: 115; Watts: 6; Wt. Lbs.: 3.0;
-
Direct Drive Blowe...
Description: 3-speed, PSC, sleeve bearing. 1075 RPM, 3 speed, resilent mounting Rotation: Plug reversible, capacitor not included Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-909; Diameter: 5-5/8″; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 4.00; HP: 3/4-1/3; Hz: 60; Insulation Class: B; Mfg. #: D970; Mounting: Resilient; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 5-1/2″; Speeds: 3; Thermal Protection: Auto; Type: PSC; Volts: 277; Wt. Lbs.: 17.8; Applications: Used for fan coils, condenser fans and other air-moving applications |Designed for a broad range of …
-
Direct Drive Blowe...
Description: 48 frame, 3-speed 1075 RPM, sleeve bearing Reversible rotation, open enclosure A: 4-1/2″; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-930; Diameter: 5-5/8″; Efficiency: 65.0%; Enclosure: OPEN; F/L Amps: 5.90; HP: 1/3-1/5; Hz: 60; Insulation Class: B; Mfg. #: D727; Mounting: Resilient/Thru Bolts; NEMA Frame: 48; Phase: Single; R: 4-13/16″; Rot.: Rev.; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 6″; Speeds: 3; Thermal Protection: Yes; Type: PSC; Volts: 115; Wt. Lbs.: 14.0; Applications: Ideal replacements for blowers in direct drive furnaces, air conditioners and exhaust fans Features: PSC |Open …
-
Condenser Fan Moto...
Description: 48 frame, 825 RPM Reversible rotation, 1-speed, SAB bearing All-angle mounting A: 4-1/16″; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 60; Bearing Type: SAB; Capacitor to Match: G21-930; Diameter: 5-5/8″; Efficiency: 60.0%; Enclosure: TEAO; F/L Amps: 1; HP: 1/6; Hz: 60; Insulation Class: B; Mfg. #: 1873; Mounting: Stud; NEMA Frame: 48; Phase: Single; Rot.: Rev.; RPM: 825; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 6″; Speeds: 1; Std. Mount. Pos.: All Angle; Thermal Protection: Auto; Type: PSC; Volts: 208-230; Wt. Lbs.: 12.0; Applications: Replaces motors in units by Carrier/Bryant and others Features: 60°C ambient, thermally protected|Flat end …
-
Replacement for Ma...
Description: Single-speed, PSC motor for Magic Chef 2-ton condenser fan units Open ventilated on shaft end as is the original motor Sleeve bearings Replaces Magic Chef #35035B001, F42B59A01, CJK15, CTK18, CJK24, CJK30 and CJK36; Westinghouse #322P859; and Magnetek #DE3L038 A: 4-15/16″; Agency Certification: UR/CSA; Ambient Operating Temp. (Celsius): 40; Bearing Type: Slv; Capacitor to Match: G21-930; Diameter: 5″; Efficiency: 65.0%; Enclosure: OAO; F/L Amps: 1.50; HP: 1/5; Hz: 60; Insulation Class: B; Mfg. #: OMC6517; Mounting: Thru-bolt; NEMA Frame: 42; Phase: Single; Rot.: CWOSE; RPM: 1075; Service Factor: 1.00; Shaft Diam.: 1/2″; Shaft Length: 3-3/8″; Speeds: 1; Std. Mount. Pos.: …